How to Clean the Bathtub Drain Without Harsh Chemicals

No one enjoys dealing with a clogged drain. However, one of the easiest ways to get rid of clogs is with a homemade drain treatment. Fortunately, baking soda and white vinegar are both household staples, so you probably have all the ingredients you need to use this quick drain treatment.

Just like a well-used pot needs a good scrubbing now and again, your bathtub drain probably needs a little attention, too. The following can help you loosen those tough clogs and restore the shine and elegance to your bathtub.

old small grille in bathtub

  1. The problem with clogged bathtubs

Bathtubs often get clogged, and the reason is usually the same: hair. Hair is a natural part of the human body, but that doesn’t mean it belongs in the bathtub drain. To prevent clogs from happening in the future, homeowners can try a few DIY methods to clear the drain from hair, soap scum, and other materials that have accumulated. The best way to get your bathtub drain working properly is to clean it out. When a drain becomes clogged, it traps water in the pipe, making it harder to flush out all of the debris.

 

  1. What to do to clean a clogged drain fast?

Clogged drains are a common household problem, but they don’t have to be expensive ones. Using a mixture of baking soda and vinegar, or a drain cleaning solution can help you fix a clogged drain fast. The baking soda and vinegar solution is especially good for clearing a slow drain, while a commercial drain cleaner can clear a clogged drain fast.

 

  1. Why the baking soda and vinegar hack works

Your bathtub is probably the dirtiest part of your home. If you’re not cleaning it on a weekly basis, you’re risking your health. Not to mention how unpleasant it is for you and your guests to shower in a dirty tub. There’s also the water bill to think about. The average family of four spends $40 on water-softening chemicals every year. Fortunately, there’s a simple hack that will do the trick for you. All you need to do is pour a pot of boiling water down the bathtub drain. Then pour a mixture of one cup baking soda and one cup vinegar into the drain. Insert the drain plug, or close the filter, and wait 5–10 minutes. Finally, flush the drain with another pot of boiling water.

 

  1. The science behind the hack

The science behind the hack is simple. Baking soda and vinegar react to each other to form carbon dioxide gas, which is what gives the bubbles in the video. The reaction also produces water, which is what gives the water drain its drainage. The reaction is exothermic, meaning that it releases heat, which is what makes the water boil.

 

  1. The hack works on slow and fast drains

 

You can easily unclog your bathroom sink with this simple genius trick. The secret is to pour boiling water down the drain. This will soften the clog and make it easier to remove. Then pour one cup of baking soda followed by one cup of vinegar. Wait 5 minutes and then pour another pot of boiling water. If you can’t use boiling water, take a kettle of boiling water and hold it as close as possible to the clog.

 

Conclusion

We hope you enjoyed our article about how to unclog a bathtub drain. With this knowledge, we know that you can make the most of your bathroom and not have to worry about your drain. So what are you waiting for? Start unclogging your drain today by following the steps above.

 

DD Counter Measure
Logo
Enable registration in settings - general